Punch Press Sound Enclosure                      Download this page as a PDF


~ Minster P2-100-48 Press ~

The following sound level data was collected before and after the installation of eNoise Control's Removable Panel Acoustical Enclosure System. The enclosures standard
features include:

Sound enclosure with access door closed


Stamping punch press sound enclosure

Call Today at 888.213.4711
Email Us (info@enoisecontrol.com)

Fax Us at 317.774.1911

Ask a Question



Sound enclosure with access door open

Stamping punch press sound enclosure with open door


  • Free standing roof system to permit removal of any two sides without dismantling roof

  • Quick connect panel joining system to facilitate installation

  • Floor leveling jack screws on door frames to permit erection on uneven floors

  • 16GA damped outer barrier/skin

  •  4" bagged absorption material (6#/cu. ft.)

  •  Acoustic seal strip between crossmembers and wall panels

  •  Dual acoustic seal strips between floor channel and floor

  •  All doors to have an acoustic seal on three sides with an adjustable door wipe floor seal

  •  All windows to be 1/4" double pane tempered glass

We can supply sound enclosures for punch presses & stamping equipment manufactured by: Bruderer, U.S. Baird, Yamada and Dobby and many others!


Stamping punch press material flow diagram Stamping punch press sound enclosure readings chart
Stamping punch press sound enclosure graph notes Stamping punch press sound enclosure graph